Dewatering screen vibration motor installation

Date: Aug. 28, 2021

The dewatering screen is a kind of mechanical equipment used for mud processing. The vibrating motor of the dewatering screen is installed in different positions, which is determined according to the customer’s production needs. The following introduces several installation positions of the motor.

Dewatering screen vibration motor installation position

The installation position of the dewatering screen motor can be selected from the bottom, side and top of the equipment.

1. The vibration motor is installed on both sides of the dewatering screen

The vibration motor can be installed on both sides of the linear screen, which can greatly reduce the equipment, and the overall height meets the customer’s requirements for the overall height of the linear screen without affecting the working efficiency of the equipment.

2. The vibration motor is installed at the bottom of the dewatering screen

The motor is installed at the bottom of the device, reducing the overall width of the linear screen, thereby ensuring the effective shielding area of ​​the device, without affecting the throughput and shielding efficiency, and greatly reducing the overall width of the linear screen.

3. The vibration motor is installed on the top of the dewatering screen

The motor can be installed in the middle of the top of the device, so that it neither increases the width of the device nor affects the height of the discharge port of the device.

The installation methods of the above three vibration motors are the common installation methods of dewatering screens. Users can refer to the type of dewatering screening according to the actual situation (site, material requirements, etc.).